Manual
4
ENGLISH
21. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
22. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
manufacturer. A charger that is suitable for one type
with another battery pack.
battery packs. Use of any other battery packs may
26. When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
the battery; avoid contact. If contact accidentally
the battery may cause irritation or burns.
Service
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
29. Follow instruction for lubricating and changing
accessories.
30. Keep handles dry, clean and free from oil and grease.
PRODUCT SAFETY WARNINGS
1. This product is a vibrator for compacting concrete.
Do not use the vibrator for any other purpose.
2. Be sure to read and understand this instruction
manual carefully before using the product so that
machine use may result in injury or machine failure.
Keep this manual for further reference.
3. This product should be used by connecting it to the
Makita portable power pack “PDC01” or “PDC1200.”
Also, read the instruction manuals for the portable
power pack and the battery charger.
4. Never use this product while connected to any other
power supply device. Doing so may result in damage
to the circuit board or burnout of the motor. The
damage or motor burnout may destroy the insulation
and cause electric shock.
5. Do not use any battery other than the dedicated
pack. Also, do not use batteries that have been
modified (including batteries that have been
disassembled and the cells or other internal parts
replaced).
6. Do not charge the battery with anything other than
the included charger.
7. The term “battery cartridge” in this manual is
hereinafter referred to as “battery.”
8. Handle and maintain this product appropriately to
ensure safe operation.
9. When you lend this product to another person, be
sure to provide them the manuals and to fully explain
to them the safe and appropriate use of the product.
11. This product complies with these EMC standards:
EN61000-6-2 / EN61000-6-4.
This product does not comply with these EMC
standards: EN61000-6-3 / EN55014-1.
12. When using this product near other electronic
devices, it may cause radio interference.
At that time, users of this product may need to take
appropriate measures.