Instructions / Assembly

Table Of Contents

P 4/ 13

epair

[3] DISASSEMBLY/ASSEEMBLY

(4) Remove Rotor from Motor housing. (Fig. 4)

(5) Remove Motor housing cover and Ball bearings from Rotor. (Fig. 5)

Fig. 4

Fig. 5

[3] -1. Fan 110, Rotor (cont.)

DISASSEMBLING

Flat washer 8

Rotor shaft

Rotor

Motor housing

Cap

Motor housing cover

1. Remove Flat washer 8 from the rotor shaft.

1. Remove Rotor from Motor housing cover with 1R045. 2. Remove Ball bearings from Rotor using 1R269.

Motor housing

2. Loosen four 3x20 Tapping screws, and

disassemble Cap from Motor housing

so that Rotor can be removed from the

cap side.

3. Tap the rotor shaft

with a plastic hammer.

4. Remove Rotor and Motor housing cover

from Motor housing.

Plastic hammer Motor housing

Rotor

Motor housing cover

1R045

Rotor

Ball bearing 626DDW

1R269

Rotor

Motor housing

cover

Ball bearing

698LLU

Ball bearing

698LLU

Ball bearing

626DDW