Instructions / Assembly

Table Of Contents

P 5/ 13

epair

[3] DISASSEMBLY/ASSEEMBLY

When handling or storing multiple Rotors, be sure to keep a proper distance between Rotors as shown in Fig. 6

because Rotor has a strong magnetic force.

Failure to follow this instruction could result in:

• Finger injury caused by pinching between Rotors

• Magnetic loss of Rotors or damage on the magnet portion of Rotor (Fig. 7)

Fig. 6 Fig. 7

[3] -1. Fan 110, Rotor (cont.)

Caution for Handling of Rotor

* Magnetic loss of Rotors

* Damage on the magnet portion of Rotor

(1) Assemble Ball bearings 626DDW/ 698LLU to Rotor. (Fig. 5)

(2) Assemble Motor housing cover to Rotor. And assemble them to Motor housing. (Fig. 8)

ASSEMBLING

Fig. 8

Rotor

Stator

1R032

1R028

Motor housing

1. Set Rotor onto 1R032.

Put Motor housing cover onto Rotor.

Press-t Motor housing cover using 1R028

and Arbor press.

Motor housing cover

and Rotor

Motor housing

Motor housing cover

2. Assemble Rotor and Motor housing cover

to Motor housing.

Note: Take care that your ngers are not pinched between

Motor housing cover and Motor housing.

1R247

3. Press-t Motor housing cover and Rotor to Motor

housing using 1R247 and Arbor press.