Use and Care Manual

2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: XCU07
Overall length (without guide bar) 443 mm

Rated voltage D.C. 36 V
Net weight 4.6 - 5.5 kg
(10.1 - 12.1 lbs)
Standard guide bar length 350 mm

Recommended guide bar
length
with 90PX, 91PX 300 - 400 mm

with 25AP 250 mm

Applicable saw chain type
(refer to the table below)
90PX
91PX
25AP
Standard sprocket Number of teeth 6
*1
Pitch 
Chain speed 0 - 20 m/s
(0 - 1,200 m/min)
(0 - 3,940 ft/min)
Chain oil tank volume 200 cm
3

*1
When using 25AP saw chain, use with Sprocket 9 (optional accessory).
 
without notice.
 
 -

Applicable battery cartridge
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
 
WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause

Saw chain, guide bar, and sprocket combination
Saw chain type 90PX
Number of drive links 46 52 56
Guide bar Guide bar length 300 mm

350 mm

400 mm

Cutting length 275 mm

330 mm

370 mm

Part No. 165245-8 165246-6 165247-4
Pitch 
Gauge 1.1 mm

 Sprocket nose bar
Sprocket Number of teeth 6
Pitch 