Use and Care Manual

8 ENGLISH
1
► 1. Prelter
Connect capsule. Align O symbol on capsule with O
symbol on handle and then rmly twist capsule in direc-
tion of arrow until it is secured.
1
► 1. O Mark
1
2
► 1. Handle 2. Capsule
NOTE:
• Always remove dust ahead of time, as suction
power will be reduced if there is too much dust
in cleaner.
• Always be sure to check that both lter and pre-
lter are loaded correctly prior to using cleaner.
If they are not loaded correctly, dust will get into
the motor housing, and cause motor failure.
If the following examples occur, lter and prel-
ter are not loaded correctly. Reload them cor-
rectly to rectify problem.
Problem Examples
Example 1: Only prelter has been loaded (no lter)
1
► 1. Prelter
Example 2: Only lter has been loaded (no prelter)
1
► 1. Filter
Example 3: Filter has been loaded in a peeled back state
1
► 1. Filter