Use and Care Manual
7 ENGLISH
1
2
► 1. Prelter 2. Filter
Disposing of dust for high
performance lter
In order to drop dust sticking on the lter in the capsule,
tap the capsule 4 or 5 times with your hand.
Now point suction inlet downwards, turn capsule in
direction of arrow in diagram, and disconnect capsule
slowly and straight.
1
2
► 1. Capsule 2. Suction inlet
NOTE:
• Dust may spill out when capsule is opened, so
be sure to set a garbage bag beneath capsule.
Remove accumulated dust from inside of capsule and
off of high performance lter.
2
1
► 1. Capsule 2. Hign performance lter
Twist high performance lter in direction of arrow to unfas-
ten securing lip from cleaner unit and then pull off the lter.
1
► 1. Securing lip
Clean out the ne dust and lightly tap to dislodge dust
from high performance lter.
Reassembly
Reassembly for normal lter
Put on lter until it is fully in position on the cleaner unit.
1
► 1. Filter
NOTE:
• Make sure lter is put on straight without being
peeled back. If lter is put on incorrectly as
shown in diagram, dust will get into motor hous-
ing, and cause motor failure.
1
► 1. Filter
Connect prelter. At this time, make sure to twist prel-
ter so that securing lip is rmly locked into cleaner unit.