Use and Care Manual
6 ENGLISH
Type of lter
Normal lter
1
2
3
► 1. Capsule 2. Prelter 3. Filter
High performance lter
2
1
► 1. Capsule 2. High performance lter
Disposing of dust
CAUTION:
• Empty the cleaner before it becomes too full, or
the suction force weakens.
• Be sure to empty out the dust inside the cleaner
itself. Failure to do so may cause the lter to be
clogged or the motor to be damaged.
Disposing of dust for normal lter
In order to drop dust sticking on the lter in the capsule,
tap the capsule 4 or 5 times with your hand.
Now point suction inlet downwards, turn capsule in
direction of arrow in diagram, and disconnect capsule
slowly and straight.
1
2
► 1. Capsule 2. Suction inlet
NOTE:
• Dust may spill out when capsule is opened, so
be sure to set a garbage bag beneath capsule.
Remove accumulated dust from inside of capsule and
off of prelter.
1
2
► 1. Prelter 2. Capsule
Twist prelter in direction of arrow to unfasten securing
lip from cleaner unit and then pull off prelter.
1
2
► 1. Prelter 2. Securing lip
Clean out ne dust from prelter. Next, remove lter,
and lightly tap to dislodge dust.