Product Manual

13 ENGLISH

When the grass basket is almost full, the indicator does

not oat while the blades are running. In this case, stop

the operation immediately and empty the basket.

Fig.27

► 1. Grass level indicator

NOTE: This indicator is a rough guide. Depending on

the conditions of inside of the basket, this indicator

may not work properly.

Adjusting the handle height

The handle height can be adjusted in two levels.

1. Hold the lower handle, and then turn the knob 90°

while pulling the knob on the lower handle to release

the locking pin. Perform the same procedure on the

other side.

Fig.28

► 1. Lower handle 2. Knob

NOTE: Supporting the handle makes it easier to

release the locking pin when pulling the knob.

2. Adjust the handle height, and then turn the

knob on both sides 90°. Make sure that the knobs are

securely xed.

Fig.29

► 1. Knob

Adjusting the traveling speed

For XML11

Fig.30

► 1. Speed lever

The traveling speed can be adjusted with the speed

lever. To decrease the speed, pull the lever toward you,

and to increase the speed, turn the lever forward.