Use and Care Manual

10 ENGLISH
3. Adjustthethreepinssothattheyarelinedupon
the alignment line.
1
►1.Alignmentline
4. Applyasmallamountofgreasetotheperiphery
ofthecrank.Attachthecranktothepinswiththesmall
and large rounds facing up.
1
►1. Crank
5. Adjustthebladesandbaseplatesothatthehole
in the base plate and the two protrusions on the blades
are lined up.
6. Turntheshearbladesupsidedownandinstall
themsothatthepinsonthetooltintheholeonthe
baseplate.Makesurethattheshearbladesarexed
securely in place.
7. Placetheundercoversothat on the under-
cover is aligned with on the lock lever.
8. While pressing the undercover, turn the under-
cover clockwise until on the undercover is aligned
with on the lock lever.