Use and Care Manual

12 ENGLISH
1
►1. Screws
NOTE:Theshearbladescanberemovedwithout
removing the screws.
5. Remove the crank from the shear blades.
1
►1. Crank
NOTE:Thecrankmayremaininthetool.
NOTE:Attachthebladecoverandthestoragecase
to the removed shear blades, and then store the
blades.
Installing shear blades
1. Preparethecrank,undercover,andnewshear
blades.
1 2
3
►1. Crank 2. Undercover 3. Shear blades
2. Attachthebladecovertotheshearblades.
3. Adjustthethreepinssothattheyarelinedupon
the alignment line.
1
►1.Alignmentline
4. Applyasmallamountofgreasetotheperipheryof
thecrank.Attachthecranktothepinswithitssmalland
large rounds facing down.
1
►1. Crank
5. Slide the shear blades so that the hole on the
base plate is positioned at the center of the rings of
blades.