Use and Care Manual
13 ENGLISH
6. Turntheshearbladesupsidedownandinstall
themsothatthepinonthetooltsintheholeonthe
shear blades. Insert the claw of the base plate into the
groove on the tool. Make sure that the shear blades are
xedsecurelyinplace.
1
►1. Claw
7. Tightenthetwoscrewsrmlywithascrewdriver.
1
►1. Screws
8. Placetheundercoversothat
on the under-
cover is aligned with on the lock lever.
9. While pressing the undercover, turn the under-
cover clockwise until on the undercover is aligned
with on the lock lever.
10. Makesurethatthelocklevertsinthegrooveon
the undercover.
1
►1. Lock lever
CAUTION: Never use the tool without install-
ing the undercover.
11. Remove the blade cover, and then turn on the tool
to check if the tool works properly.
NOTICE: If the shear blades do not operate prop-
erly, the blades are not engaging the crank prop-
erly. Remove the blades and install them again.