Use and Care Manual
![](/manual/makita/xnu01t/use-and-care-manual-english-spanish/images/img-17.png)
18 ENGLISH
5. Settheangleofaleto45°,andgrindtheupper
bladefrom3directionswiththele.
1
2
►(1) File (2) 45°
CAUTION: Before grinding the shear blades,
make sure that the tool is switched o and the
battery cartridge is removed from the tool.
6. Place the tool upside down, and then remove the
burrsfromtheshearbladeswiththele.
1
►1. File
7. Settheangleoftheleto45°,andgrindthelower
bladefrom3directionswiththele.
8. Return the tool to normal position, and then
removetheburrsfromtheshearbladeswiththele.
9. Attachthebranchcatcherbytighteningthescrew.
Grease lubrication
Interval of lubrication:Every25operatinghours
1. Remove the bolt from the hole for lubrication.
1
►1. Bolt
2. Remove the cap from the grease vessel. Align the
outlet of the grease vessel with the hole on the cover,
and then press the outlet of the grease vessel onto the
hole.
21
►1. Grease vessel 2. Hole
3. Applythegreasetothetool(Approximately5g
(0.2 oz) as a guide).
4. Tighten the bolt.