Use and Care Manual

13 ENGLISH
7. Aligntheprotrusionsontheshearbladesvertically
at the same position.
1
1
►1. Protrusion
8. Attach the felt pad to the shear blades.
1
►1. Felt pad
9. Insert the protrusion on the shear blades to the
hole on the rod, then align the position of the felt pad
with the holes on the tool, and then attach the sleeves.
2
1
4
3
►1. Felt pad 2. Protrusion 3. Hole 4. Sleeve
NOTICE: Apply a small amount of grease to the
inner periphery of the hole of the rod.
NOTICE: Be careful not to lose the sleeves.
10. Align the holes on the sleeves and the shear
blades with the holes on the tool, and then tighten 2
boltstoxtheshearblades.
1
2
►1. Bolt 2. Hole