Use and Care Manual

9 ENGLISH
1
►1. Dust cup
Dust cup set
Optional accessory
NOTICE: Do not use the dust cup set when drill-
ing in metal or similar. It may damage the dust cup
set due to the heat produced by small metal dust or
similar. Do not install or remove the dust cup set with
the drill bit installed in the tool. It may damage the
dust cup set and cause dust leak.
NOTE: The standard side grip cannot be used
with the dust cup set being installed on the tool.
When the dust cup set is installed on the tool, remove
the grip from the standard side grip, and then attach it
to the optional grip base set.
Before installing the dust cup set, remove the bit from
the tool if installed.
Installthespacersothatthegroovesonthespacert
in the protrusions on the tool barrel while widening it.
Be careful for the spring not to come off from the slit of
spacer.
1
2
►1. Spacer 2. Spring
Install the side grip (optional grip base set and standard
grip)sothatthegrooveonthegriptintheprotrusion
onthespacer.Turnthegripclockwisetosecureit.
1
►1. Side grip
Install the dust cup set so that the claws of the dust cup
tinintheslitsonthespacer.
1
2
►1. Dust cup 2. Claws
NOTE: If you connect a vacuum cleaner to the dust
cup set, remove the dust cap before connecting it.