Use and Care Manual

10 ENGLISH

►1. Drill bit 2. Chuck cover

Chisel angle (when chipping,

scaling or demolishing)

Thechiselcanbesecuredatthedesiredangle.To

change the chisel angle, rotate the action mode chang-

ingknobtotheOsymbol.Turnthechiseltothedesired

angle.

1 2

►1.Actionmodechangingknob2. Pointer

Rotate the action mode changing knob to the

sym-

bol.Thenmakesurethatthechiselissecurelyheldin

placebyturningitslightly.

Depth gauge

Thedepthgaugeisconvenientfordrillingholesof

uniform depth.

Press and hold the lock button, and then insert the

depth gauge into the hex hole.

1 2

►1. Depth gauge 2. Lock button

Make sure that the toothed side of the depth gauge

faces the marking.

►1. Marking 2.Toothedside

Adjustthedepthgaugebymovingitbackandforth

whilepressingthelockbutton.Aftertheadjustment,

release the lock button to lock the depth gauge.

NOTE: Make sure that the depth gauge does not

touchthemainbodyofthetoolwhenattachingit.