Use and Care Manual

11 ENGLISH

Dust extractor attachment

Optional accessory

Installing the dust extractor

attachment

1. Loosen the side grip on the tool.

2. Install the dust cover so that the claws of the dust

covertinthegroovesbetweenthetoolandtheside

grip.

►1. Dust cover 2. Claw 3. Groove

3. Tightenthesidegripsecurely.

4. Setthesuitablebellowsordustcoverextension

foryourwork.Whenyouusebellows,attachthejointto

itstop.Whenyoustacktwobellows,connectthemwith

thejoint.

►1. Dust cover extension 2. Dust cover 3. Joint

4. Bellows

Connecting the tool to the vacuum

cleaner

1. Attachtheholderjointtothetool,andthenattach

thehoseholdertotheholderjoint.

►1.Holderjoint2. Hose holder

2. Fix the hose to the hose holder.

►1. Hose holder

NOTE:Usejoint25toconnectthehoseandthedust

coverifnecessary.