Manualshelf

Use and Care Manual

ManualsBrandsMakita ManualsPower Multi ToolsMakita 18-Volt X2 LXT Lithium-Ion (36-Volt) Cordless 1-9/16 in. Rotary Hammer, accepts SDS-MAX bits (Tool Only)
11121314151617181920
12 ENGLISH
Using depth gauge for drilling
operation
Whenyoustacktwobellows,attachthedepthgauge
extension to the depth gauge.
1
►1. Depth gauge extension
Dust extractor attachment (for
hammering only)
Optional accessory
1. Install the hose holder.
When the side handle is installed to tool, loosen the
clamp nut, and then remove the hex bolt. Install the
hoseholderwiththehexboltandtheclampnutby
tighteningtheclampnutrmly.
1
2
3
►1. Bolt 2. Hose holder 3. Clamp nut
When the side grip is installed to the tool, loosen the
side grip, mount the hose holder to the shaft, and then
tightenthesidegriprmly.
1
2
3
►1. Hose holder 2.Shaft3.Sidegrip
2. Attachtheholderjointtothetool,andthenattach
thehoseholdertotheholderjoint.
1
2
►1.Holderjoint2. Hose holder