Use and Care Manual

12 ENGLISH

Depth gauge

Thedepthgaugeisconvenientfordrillingholesof

uniform depth.

Press and hold the lock button, and then insert the

depth gauge into the hex hole. Make sure that the

toothed side of the depth gauge faces the marking.

►1. Depth gauge 2. Lock button 3. Marking

4.Toothedside

Adjustthedepthgaugebymovingitbackandforth

whilepressingthelockbutton.Aftertheadjustment,

release the lock button to lock the depth gauge.

NOTE: Make sure that the depth gauge does not

touch the main body of the tool when attaching it.

Installing or removing the dust

collection system

Optional accessory

Toinstallthedustcollectionsystem,insertthetoolinto

the dust collection system all the way until it locks in

place with a little double click.

Toremovethedustcollectionsystem,pullthetoolwhile

pressing the lock-off button.

►1. Lock-off button