INSTRUCTION MANUAL MANUEL D'INSTRUCTION MANUAL DE INSTRUCCIONES Cordless Recipro Saw Scie Recipro sans Fil Sierra Recíproca Inalámbrica XRJ02 XRJ03 006896 IMPORTANT: Read Before Using. IMPORTANT: Lire avant usage. IMPORTANTE: Leer antes de usar.
ENGLISH (Original instructions) SPECIFICATIONS XRJ02 Model Length of stroke XRJ03 28 mm (1-1/8") Strokes per minute 0 - 2,900/min Pipe Max. cutting capacities 130 mm (5-1/8") Wood 255 mm (10") Overall length 499 mm (19-21/32") Net weight 3.5 kg (7.7 lbs) Rated voltage 449 mm (17-3/4") 3.7 kg (8.2 lbs) 3.3 kg (7.4 lbs) 3.6 kg (7.9 lbs) D.C.
26. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. 27. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
12. 13. 14. 15. 6. Do not touch the blade or the workpiece immediately after operation; they may be extremely hot and could burn your skin. Do not operate the tool at no-load unnecessarily. Always use the correct dust mask/respirator for the material and application you are working with. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data. 7. 8. 9. SAVE THESE INSTRUCTIONS.
Battery protection system (Lithium-ion battery with star marking) FUNCTIONAL DESCRIPTION • CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. 1. Star marking 1 Installing or removing battery cartridge 1. Red indicator 2. Button 3. Battery cartridge 1 012128 2 Lithium-ion batteries with a star marking are equipped with a protection system.
When the blade loses its cutting efficiency in one place along its cutting edge, reposition the shoe to utilize a sharp, unused portion of its cutting edge. This will help to lengthen the life of the blade. To reposition the shoe, push the shoe button in the "A" direction with a click and reposition as shown in the figure which allows you to make five-way adjustment. To secure the shoe, push the shoe button in the "B" direction with a click. Pull the switch trigger to light up the lamp.
OPERATION 1. Blade clamp sleeve 2. Released position 3. Fixed position 2 1 3 005787 Insert the saw blade into the blade clamp as far as it will go. The blade clamp lever rotates and the saw blade is fixed. Make sure that the saw blade cannot be extracted even though you try to pull it out. 1 006903 CAUTION: Always press the shoe firmly against the workpiece during operation.
Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps. MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
FRANÇAIS (Mode d’emploi original) SPÉCIFICATIONS XRJ02 Modèle Longueur de frappe XRJ03 28 mm (1-1/8") Nombre d'impacts par minutes Capacités de coupe max. 0 - 2 900/min Tuyau 130 mm (5-1/8") Bois 255 mm (10") Longueur totale 499 mm (19-21/32") Poids net 3,5 kg (7,7 lbs) Tension nominale 449 mm (17-3/4") 3,7 kg (8,2 lbs) 3,3 kg (7,4 lbs) 3,6 kg (7,9 lbs) C.C.
19. Débranchez la fiche de la source d'alimentation et/ou retirez le bloc-piles de l'outil électrique avant d'effectuer tout réglage, de changer un accessoire ou de ranger l'outil électrique. De telles mesures préventives réduisent les risques de démarrage accidentel de l'outil électrique. 20.
10. 27. Dans des conditions d'utilisation inadéquates de la batterie, il peut y avoir fuite d'électrolyte; évitez tout contact avec ce liquide. En cas de contact accidentel, rincez avec beaucoup d’eau. Si le liquide pénètre dans vos yeux, il faut aussi consulter un médecin. L'électrolyte qui s'échappe de la batterie peut causer des irritations ou des brûlures. Réparation 28. Faites réparer votre outil électrique par un réparateur qualifié qui utilise des pièces de rechange identiques aux pièces d'origine.
6. 7. 8. 9. métalliques, par exemple des clous, des pièces de monnaie, etc. (3) Évitez d'exposer la batterie à l'eau ou à la pluie. Un court-circuit de la batterie pourrait provoquer un fort courant, une surchauffe, parfois des brûlures et même une panne. Ne rangez pas l'outil ou la batterie dans des endroits où la température risque d'atteindre ou de dépasser 50 ゚ C (122 ゚ F). Ne jetez pas la batterie au feu même si elle est sérieusement endommagée ou complètement épuisée.
Système de protection de la batterie (batterie lithium-ion marquée d’une étoile) 1. Bouton du sabot 2. Sabot 1. Étoile 1 B 1 2 006899 Lorsque la lame perd de son efficacité de coupe sur une portion de son tranchant, repositionnez le sabot de façon à utiliser une autre portion intacte. Cela vous permettra d'allonger la durée d'usage de votre lame.
Allumage de la lampe avant (Pour le XRJ02) Pose et retrait de la lame de scie ATTENTION: Nettoyez toujours la lame, la porte-lame et/ou le coulisseau de tous les copeaux ou corps étrangers qui y adhèrent. La négligence de ce nettoyage peut causer un serrage insuffisant de la lame dont peut résulter une grave blessure. Pour installer la lame, assurez-vous toujours que le levier de serrage se trouve en position de libération sur le couvercle d'isolation avant d'insérer la lame.
ENTRETIEN 1. Levier de serrage de la lame • 1 • 006665 NOTE: • Gardez les mains et les doigts à l'écart du levier pendant le changement. Autrement il y a risque de blessure. • Si vous retirez la lame sans faire tourner complètement le levier de serrage, ce dernier risque de ne pas se verrouiller en position de libération . Le cas échéant, faites tourner complètement le levier de serrage puis assurez-vous qu'il est verrouillé en position de libération .
ACCESSOIRES EN OPTION GARANTIE LIMITÉE D’UN AN MAKITA Politique de garantie Chaque outil Makita est inspecté rigoureusement et testé avant sa sortie d’usine. Nous garantissons qu’il sera exempt de défaut de fabrication et de vice de matériau pour une période d’UN AN à partir de la date de son achat initial. Si un problème quelconque devait survenir au cours de cette période d’un an, veuillez retourner l’outil COMPLET, port payé, à une usine ou à un centre de service après-vente Makita.
ESPAÑOL (Instrucciones originales) ESPECIFICACIONES XRJ02 Modelo Extensión de la carrera XRJ03 28 mm (1-1/8") Carreras por minuto Capacidad máxima de corte 0 - 2 900 cpm Tubo 130 mm (5-1/8") Madera 255 mm (10") Longitud total 499 mm (19-21/32") Peso neto 3,5 kg (7,7 lbs) 449 mm (17-3/4") 3,7 kg (8,2 lbs) Tensión nominal 3,3 kg (7,4 lbs) 3,6 kg (7,9 lbs) 18 V c.c.
19. Seguridad personal 10. Manténgase alerta, preste atención a lo que está haciendo y utilice su sentido común cuando opere una herramienta eléctrica. No utilice la herramienta eléctrica cuando esté cansado o bajo la influencia de drogas, alcohol o medicamentos. Un momento de distracción mientras opera la máquina puede dar como resultado heridas personales graves. 11. Use equipo de protección personal. Póngase siempre protección para los ojos.
11. 27. En condiciones abusivas, podrá escapar líquido de la batería; evite tocarlo. Si lo toca accidentalmente, enjuague con agua. Si hay contacto del líquido con los ojos, acuda por ayuda médica. Puede que el líquido expulsado de la batería cause irritación o quemaduras. Servicio de mantenimiento 28. Haga que una persona calificada repare la herramienta utilizando sólo piezas de repuesto idénticas. Esto asegura que se mantenga la seguridad de la herramienta eléctrica. 29.
5. 6. 7. 8. 9. No cortocircuite el cartucho de batería: (1) No toque las terminales con ningún material conductor. (2) Evite guardar el cartucho de batería en un cajón junto con otros objetos metálicos, tales como clavos, monedas, etc. (3) No exponga la batería de cartucho a la lluvia o nieve. Un corto circuito en la batería puede causar un flujo grande de corriente, sobrecalentamiento, posibles quemaduras y aún descomposturas.
Sistema de protección de batería (batería de ión de litio con marca de estrella) 1. Botón de pie 2. Pie 1. Marca de estrella 1 B 1 2 006899 Cuando la segueta no logre cortar bien en algún sitio de su filo, habrá que reajustar la zapata a manera de obtener una porción que corte bien y que todavía no haya sido usada en el filo de la segueta. Con esto la segueta se podrá usar durante más tiempo.
Iluminación de la lámpara delantera (Para XRJ02) ENSAMBLE 1. Lámpara 1 • PRECAUCIÓN: Asegúrese siempre de que la herramienta esté apagada y el cartucho de batería extraído antes de realizar cualquier trabajo en la misma. Para instalar o quitar la segueta. PRECAUCIÓN: Limpie siempre las virutas y materias extrañas adheridas a la segueta, abrazadera de la segueta y/o guía de deslizamiento. En caso contrario, la segueta podría quedar insuficientemente apretada, pudiendo ocasionar graves heridas.
permitir que el disco salga, como se muestra en la ilustración. Quite el cartucho de batería de la herramienta. Para extraer la hoja de la sierra, gire completamente la palanca de sujeción de ésta en la dirección de la flecha. Se extrae la hoja de la sierra y su palanca se fija en la posición liberada . Utilice siempre líquido refrigerante apropiado (lubricante para cuchillas) al cortar metales. De no hacerlo, la segueta se desgastará más rapido.
compruebe la herramienta mientras está en marcha y la operación del freno eléctrico cuando suelte el gatillo interruptor. Si el freno eléctrico no funciona bien, pida a su centro de servicio Makita local que se lo repare. Para mantener la SEGURIDAD y FIABILIDAD del producto, las reparaciones, y cualquier otra tarea de mantenimiento o ajuste deberán ser realizadas en Centros de Servicio Autorizados por Makita, empleando siempre repuestos Makita.
< USA only > WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and • arsenic and chromium from chemically-treated lumber.
GB Radio Instruction manual F Radio Manuel d’instructions E Radio Manual de instrucciones XRM02
12 10 2 3 14 1 4 5 6 7 8 9 13 L K A B C 20 J PM I D H E G F 11 1 2
14 15 15 15 16 11 2 3 17 18 19 21 4 5 19 19 6 7 3
19 19 8 9 10 10 10 11 8 9 12 4
ENGLISH (Original instructions) IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: 1. Read this instruction manual and the charger instruction manual carefully before use. 2. Clean only with dry cloth. 3. Do not block any ventilation opening. Install in accordance with the manufacturer’s instruction. 4.
• Powered by both Makita battery pack and supplied power adaptor Explanation of general view (Fig. 1) Controls: 1. Power and Sleep timer 2. Band and Mono button 3. Radio alarm set 4. Buzzer alarm set 5. Preset stations 6. Scan tuning and Time set 7. Tuning/Volume control knob 8. DC IN socket 9. Input terminal (AUX IN1) 10. Soft bended rod antenna 11. Battery compartment (covering main battery pack and back up batteries) 12. Handle 13. Speaker 14. Battery compartment locker 15. Main battery compartment 16.
The following tables indicate the operating time on a single charge. Battery Cartridge Voltage 7.2 V 9.6 V 10.8 V 12 V 14.4 V 18 V PA09 PA12 PA14 PA18 9050 1250 1450 1850 9051 1251 1452 1852 9100 1200 1420 BL1815 1220 BL1415 BL7010 AT SPEAKER OUTPUT= 50 mW + 50 mW unit: Hour Approx. 7.0 9120 BL1014 9100A 1200A 9102 1202 1422 BH1420 BL1815N 9122 1222 9102A 1202A BH9020 BH1220 BH9020A BH1200C 9134 1234 Approx. 10.0 1822 Approx. 12.5 1434 1834 BH1427 9135 Approx.
Note: The battery pack can’t be charged via the supplied AC power adaptor. 6. When low battery sign appears and an “E” keeps on flashing is the time to replace the back up batteries. Installing the Soft bended rod antenna (Fig. 10 & 11) Install the Soft bended rod antenna as shown in the figure. Note: There is a click in the battery compartment designed to store the removed antenna. Using Supplied AC power adaptor (Fig.
Recall stations from preset memories 1. Press the Power button to turn on the radio. 2. Select the required waveband. 3. Momentarily press the required Preset button, the preset number and station frequency will appear in the display. Setting the radio alarm When the radio alarm is selected, the radio will turn on and play the chosen radio station at the chosen alarm time. The radio alarm will continue for one hour unless turned off by pressing the Power button.
How to play other audios CAUTION: Unplug this apparatus before connecting other audios. • There are 2 AUX in sockets. AUX 1 is located on the front panel, and AUX 2 is located in the battery compartment. • Connect a stereo or mono source (i.e. iPod, MP3, or CD player) to either AUX 1 or AUX 2 by audio cord. • Repeatedly press and release the Band button until “AU1” or “AU2” is displayed, then AUX function is activated. • AUX can’t be activated as alarm source.
FRANÇAIS (Mode d’emploi original) CONSIGNES DE SÉCURITÉ IMPORTANTES AVERTISSEMENT : Lors de l’utilisation d’outils électriques, il faut toujours prendre des précautions élémentaires de sécurité, dont les suivantes, pour réduire les risques d’incendie, de décharge électrique et de blessure. 1. Lisez attentivement ce manuel d’instructions et celui du chargeur avant l’utilisation. 2. Nettoyez uniquement avec un chiffon sec. 3. Ne bloquez aucun orifice de ventilation.
Caractéristiques : • • • • • • • • • • • Synthétiseur PLL AM/FM stéréo Écran LCD lumineux Recherche manuelle/présélection/automatique Réglage du son Présélections de 5 radios sur chaque bande Horloge et deux alarmes (radio et buzzer) avec fonction « sieste » Radio réveil (arrêt automatique) Haut-parleur stéréo de haute qualité Design dépouillé Résistance à l’eau - IPX 4 Alimenté par des piles Makita ou l’adaptateur secteur fourni Descriptif (Fig. 1) Contrôles : 1. Mise en marche et fonction de sommeil 2.
Le tableau suivant indique le temps de fonctionnement par charge.
batterie sur l’écran sont les signes qu’il est nécessaire de changer de batteries. Remarque : Les batteries ne peuvent pas être rechargées à l’aide de l’adaptateur secteur fourni. 6. Quand le témoin de charge de la batterie apparaît et qu’un « E » clignote, il est temps de changer les batteries. Installation de l’antenne à tige souple (Fig. 10 et 11) Procéder comme indiqué sur la figure pour installer l’antenne à tige souple.
Stockage des stations de radio en mémoire présélectionnée Il y a 5 mémoires présélectionnées sur chaque bande de fréquence. 1. Appuyer sur le bouton de mise en marche pour activer la radio. 2. Rechercher la station choisie comme décrit précédemment. 3. Appuyer sur le bouton et le maintenir enfoncé jusqu’à ce que la radio émette un bip. La station sélectionnée apparaît sur l’écran, et la station est stockée en mémoire sous le bouton choisi. 4. Répéter l’opération pour les autres présélections. 5.
Relâcher le bouton de mise en marche quand l’heure sélectionnée apparaît à l’écran. Le symbole apparaît à l’écran et la radio se met en marche sur la dernière station sélectionnée. 2. Pour désactiver la fonction de sommeil, appuyer sur le bouton de mise en marche. Le symbole disparaît et la radio est arrêtée. Eclairage de l’écran Appuyer sur n’importe quel bouton ou tourner sur le bouton de commande Réglage/Volume et l’écran LCD s’éclaire pendant environ 15 secondes.
ESPAÑOL (Instrucciones originales) INSTRUCCIONES IMPORTANTES DE SEGURIDAD ADVERTENCIA: Cuando utilice herramientas eléctricas, deberá tomar siempre precauciones de seguridad básicas, incluyendo las siguientes, para reducir el riesgo de incendios, descargas eléctricas y heridas personales: 1. Lea este manual de instrucciones y el manual de instrucciones del cargador con cuidado antes de usar. 2. Limpie sólo con un paño limpio. 3. No obstruya ninguna apertura de ventilación.
Para Estados Unidos: Precauciones para el usuario Los cambios o modificaciones que no hayan sido expresamente autorizados por la entidad responsable por el cumplimiento de las regulaciones podrían anular la autoridad del usuario de utilizar este equipo. Este equipo ha sido probado y demuestra que cumple con los límites de un Dispositivo Digital de Clase B, en conformidad con la sección 15 de las regulaciones de la FCC.
La tabla a continuación indica el tiempo de operación en una sola carga. Voltaje del cartucho de batería 7,2 V 9,6 V 10,8 V 12 V 14,4 V 18 V PA09 PA12 PA14 PA18 9050 1250 1450 1850 9051 1251 1452 1852 9100 1200 1420 BL1815 1220 BL1415 BL7010 A NIVEL DE SALIDA DEL ALTAVOZ= 50 mW + 50 mW unidad: Hora Aprox. 7,0 9120 BL1014 9100A 1200A 9102 1202 1422 BH1420 BL1815N 9122 1222 9102A 1202A BH9020 BH1220 BH9020A BH1200C 9134 1234 Aprox. 10,0 1822 Aprox.
de que el paquete de baterías requiere ser reemplazado. Nota: El paquete de baterías no puede recargarse mediante el adaptador del cable eléctrico de CA. 6. Cuando el símbolo de batería baja aparece y una “E” continúa parpadeando, significa que es tiempo de reemplazar las pilas de respaldo. Instalación de la antena plegable de varilla suave (Fig. 10 y 11) Instale la antena plegable de varilla suave como se ilustra en la figura.
4. Continúe girando la perilla de control de sintonía / volumen hasta que haya conseguido mostrar la frecuencia deseada en la pantalla. 5. Gire la perilla de control de sintonía / volumen para conseguir el nivel de sonido deseado. 6. Para apagar la radio, presione el botón encendido. La pantalla mostrará “OFF”. Almacenamiento de estaciones en memorias preajustadas Hay 5 preajustes de memoria para cada banda de frecuencia. 1. Presione el botón de encendido de la radio para encenderla. 2.
presione el botón de ajuste de hora nuevamente para completar el ajuste de la alarma de timbre HWS. 6. Presione y mantenga presionado el botón de la alarma de timbre por más de 2 segundos y enseguida se emitirá un pitido el cual activa o desactiva la alarma de timbre HWS. La pantalla mostrará el símbolo cuando la alarma de timbre esté activa. Función de silenciador temporal 1.
23
Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan XRM02(DMR102)-NA3-0914 ALA www.makita.
DC18RA DC18RC Fast Charger Chargeur rapide Cargador rápido Symbols The followings show the symbols used for the charger and battery. Be sure that you understand their meaning before use. Symboles Nous donnons ci-dessous les symboles utilisés pour le chargeur et la batterie. Assurez-vous que vous en avez bien compris la signification avant d’utiliser l’outil. Símbolos A continuación se muestran los símbolos utilizados con el cargador y la batería. Asegúrese de que entiende su significado antes de usarla.
• Do not short batteries. • Ne jamais court-circuiter les bornes d’une batterie. • No provoque un cortocircuito en las baterías. IMPORTANT: Read Before Using. IMPORTANT : Lire ce qui suit avant d’utiliser cet outil. IMPORTANTE: Leer antes de usar.
ENGLISH Specifications Model DC18RA Input DC18RC A.C. 120 V 50 – 60 HZ Output Weight D.C. 7.2 V – 18 V 0.88 kg (1.94 lbs) 0.77 kg (1.70 lbs) • Manufacturer reserves the right to change specifications without notice. • Note: Specifications may differ from country to country. • Weight according to EPTA-Procedure 01/2003. IMPORTANT SAFETY INSTRUCTIONS CAUTION: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17.
5. With finish of charge, the green light remains lit with the red light going out and the melody sound preset at the insertion of battery cartridge or buzzer sound (a long beep) comes out to notify completion of charge. (In selected silent mode, no sounds come out.) 6. Preset melody sound remains stored even when the charger is unplugged. NOTE: • The battery charger is for charging Makita-battery cartridge. Never use it for other purposes or for other manufacturer’s batteries.
FRANÇAIS Spécifications Modèle Entrée DC18RA DC18RC C.A. 120 V 50 – 60 Hz Sortie Poids C.C. 7,2 V – 18 V 0,88 kg (1,94 lbs) 0,77 kg (1,70 lbs) • Le fabricant se réserve le droit de modifier sans avertissement les spécifications. • Remarque : Les spécifications peuvent varier selon les pays. • Poids selon la procédure EPTA 01/2003. LES CONSIGNES DE SECURITE IMPORTANTES ATTENTION : 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17.
Changer la mélodie de charge terminée 1. Lorsque vous insérez la batterie dans le chargeur, le chargeur émet la dernière courte mélodie préréglée d’indication de charge terminée. 2. Si vous retirez et réinsérez la batterie dans les cinq secondes qui suivent cette action, la mélodie changera. 3. Chaque fois que vous retirez et réinsérez la batterie dans les cinq secondes par la suite, la mélodie change dans l’ordre préétabli. 4.
Tension 9,6 V 12 V 14,4 V Nombre de cellules 8 10 12 Cartouche de batterie au Ni-MH Capacité (Ah) Temps de charge (en minutes) 20 — — — 1,7 BH9020A — — 2,0 20 — BH1220/C BH1420 2,0 15 20 — — — 2,7 BH9033A — — 3,3 30 — BH1233/C BH1433 3,3 22 Tension 14,4 V 18 V 14,4 V 18 V Nombre de cellules 4 5 8 10 Cartouche de batterie au Li-ion BL1415 BL1815 — — 15 — — BL1430 BL1830 22 Temps de charge (en minutes) Note : • La charge complète peut prendre jusqu’
ESPAÑOL Especificaciones Modelo DC18RA 120 V Entrada Salida Peso DC18RC 50 – 60 Hz 7,2 V cc – 18 V cc 0,88 kg (1,94 lbs) 0,77 kg (1,70 lbs) • El fabricante se reserva el derecho a cambiar las especificaciones sin aviso. • Nota: Las especificaciones podrán cambiar de un país a otro. • Peso de acuerdo con el procedimiento EPTA 01/2003. INSTRUCCIONES DE SEGURIDAD IMPORTANTES PRECAUCION: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17.
Cambio de la melodía de carga terminada 1. 2. 3. 4. Al insertar el cartucho de batería en el cargador se emite el último sonido de melodía breve programado. El sonido de melodía puede cambiarse extrayendo y reinsertando antes de cinco segundos el cartucho de batería. Cada vez que se extraiga y reinserte antes de otros cinco segundos, el sonido de melodía cambiará en orden. Cuando se emita el sonido de melodía deseado, deje el cartucho de batería insertado y comenzará la carga.
Tensión 9,6 V cc 12 V cc 14,4 V cc Número de celdas 8 10 12 Capacidad (Ah) Cartucho de batería Ni-MH Tiempo de carga (minutos) — — — 1,7 Ah 20 min BH9020A — — 2,0 Ah 20 min — BH1220/C BH1420 2,0 Ah 15 min — — — 2,7 Ah 20 min BH9033A — — 3,3 Ah 30 min — BH1233/C BH1433 3,3 Ah 22 min Tensión 14,4 V cc 18 V cc 14,4 V cc 18 V cc Número de celdas 4 5 8 10 Cartucho de batería Li-ion BL1415 BL1815 — — 15 min — — BL1430 BL1830 22 min Tiempo de carga (min
11
Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 884676H946 IDE www.makita.