Instruction Manual

11 ENGLISH
1. Press and hold the Menu/Info button to enter the
menu setting.
2. Rotate the Tuning control knob
until “CLOCK xxH”
appears on the display and press the Tuning control
knob
to enter the setting. You will see the time
format begins to flash.
3. Rotate the Tuning control knob
to select either 12
or 24 hour format. Press the Tuning control knob
to confirm your choice of clock format.
Note:
If the 12 hour clock format is chosen, the radio will then
use the 12 hour clock for the setting.
4. Press and hold the Menu/Info button
to enter the
menu setting.
5. Rotate the Tuning control knob until a date (e.g.
THU APR 3) appears on the display and press the
Tuning control knob
to enter the setting. You will
see the date format begins to flash.
6. Rotate the Tuning control knob
to select the
desired date format. Press the Tuning control knob
to confirm your choice.
Setting the clock time and date
1. Press and hold the Menu/Info button .
2. Rotate the Tuning control knob
until “CLOCK ADJ”
appears on the display. Press the Tuning control knob
to enter the setting.
3. The hour setting on the display will begin flashing.
Rotate the Tuning control knob to
select the
desired hour, and press the Tuning control knob
to
confirm the setting. Then rotate the Tuning control knob
to select the desired minute, and press the Tuning
control knob
to confirm the setting.
4. Rotate the Tuning control knob
until “DATE ADJ”
appears on the display. Press the Tuning control knob
to enter the setting.
5. Rotate the Tuning control knob
to select the desired
year and press the Tuning control knob
to confirm
the setting. Then rotate the Tuning control knob
to
select the desired month, and press the Tuning control
knob
to confirm the setting. Then rotate the Tuning
control knob
to select the desired date and press
the Tuning control knob
to confirm the setting.
Radio Data System (RDS)
When you set the clock time using the RDS function, your
radio will synchronize its clock time whenever it tunes to a
radio station using RDS with CT signals.
1. When tuning to a station transmitting RDS data, press
and hold the Menu/Info button
.
2. Rotate the Tuning control knob
until “RDS CT” and
a clock symbol appear on the display. Press the Tuning
control knob
to enter the setting.
3. Rotate the Tuning control knob
until “RDS CT”
appears on the display. Press the Tuning control knob
to confirm the setting. The clock time of the radio
will set up automatically according to the RDS data
received.
4. When the action is completed, the RDS icon will appear
on the LCD display indicating the radio time is RDS
clock time. The radio clock time will be valid for 5 days
each time the radio time is synchronized with RDS CT.
Setting the alarm clock
Your radio has two alarms which can each be set to wake
you to AM/FM radio or buzzer alarm. The alarms may be
set while the unit is in standby mode or while playing.
a. Setting radio alarm time:
1. The radio alarm can be set either when radio is on or
off.
2. Press and hold the radio alarm button
, the
radio alarm symbol and the display hour will flash along
with a beep.
3. During radio alarm symbol
flashes, rotate
Tuning control knob
to select the hour and press
Tuning control knob
again to confirm hour setting.
Then rotate the Tuning control knob
to select the
minute and press Tuning control knob
to confirm
minute setting.
4. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays
WEEKEND – the alarm will sound only at weekends
Press the Tuning control knob
to confirm the
setting.
5. During radio alarm symbol is flashing, rotate Tuning
control knob
to select desired wake-up band and
station, then press Tuning control knob
to confirm
the selection.
6. Rotate Tuning control knob
to select the desired
volume and press Tuning control knob
to confirm
the volume. Radio alarm setting is now completed.
Note:
If new radio alarm station is not selected, it will select the
last alarm station.
Note:
If the selected AM/FM alarm station is not available when
the alarm is sounding, the buzzer alarm will be used
instead.
b. Setting HWS (Humane Wake System) buzzer alarm:
A beep tone will activate when selecting the HWS buzzer
alarm.
The alarm beep will sound shorter every 15 seconds
for one minute followed by one minute silence before
repeating the cycle.