Cut Sheet

5
Installing or removing slide battery
cartridge (Fig. 3 and 4)
•
•
•
•
To install the battery cartridge, align the tongue on
the battery cartridge with the groove in the housing
and slip it into place. Always insert it all the way until it
locks in place with a little click.
If you can see the red indicator on the upper side of
the button, it is not locked completely. Install it fully
until the red indicator cannot be seen. If not, it may
accidentally fall out of the tool, causing injury to you or
someone around you.
Do not use force when inserting the battery cartridge.
If the cartridge does not slide in easily, it is not being
inserted correctly.
To remove the battery cartridge, sliding it from the tool
while pressing the button on the front of the cartridge.
Note:
When the speaker is in low battery, the middle LED
will ash in red.
Indicating the remaining battery
capacity
Only for battery cartridges with "B" at the end of the
model number
Press the check button on the battery cartridge to
indicate the remaining battery capacity. The indicator
lamps light up for few seconds.
1.
Indicator lamps
2.
Check button
1
2
Power by battery
The following table indicates the operating time on a
single charge.
Battery
capacity
Battery Cartridge Voltage
AT SPEAKER OUTPUT = 100mW (unit: Hour)
10.8V
-12Vmax
18V AUX IN Bluetooth
(Approximately)
1.5Ah
2.0Ah
3.0Ah
4.0Ah
5.0Ah
6.0Ah
11
9.0
1.0
1.5BL1815N
12
9.5
BL1016
BL1021B
BL1820B
BL1830/
BL1830B
BL1840B
BL1850B
BL1860B
13
15
12
14
2.0
1.0
BL1041B
17 3.018
28 2.531
24 4.025
5.5
6.5
31
37
32
39
AUX IN
+USB(2.1A)
Bluetooth
+USB(2.1A)