Installation Guide

Table Of Contents

P 7/ 19

2. Remove Retaining ring R-28 with 1R291. 3. Remove Ball bearing 6001DDW by pressing down 1R028.

1R291

Retaining ring R-28

Ball bearing

6001DDW

1R028

Fig. 2-1-9

Ring 14

Rotor

1. Remove Rotor and Ring 14 from Motor housing with 1R045.

Note: Hook the jaws of 1R045 to Motor housing and set the center shaft of 1R045 to the shaft of Rotor.

The jaws must not be touched to Rotor.

Motor housing

1R045