Installation Guide

P 9/ 19
Fig. 2-2-4
1. Place Stator ass’y on the shaft of Rotor.
Note:
* Be careful not to pinch your fingers between Stator and Rotor by strong magnet power.
* Mount Stator ass’y while aligning its hole to the locating pin on Motor housing.
(5) Mount Stator ass’y to Motor housing. (Fig. 2-2-4)
2. Set Motor housing on 1R033.
Apply 1R026 on Stator ass’y and press down 1R026.
Locating pin on
Motor housing
Hole of Stator ass’y
1R026
Stator ass’y
Shaft of Rotor
Motor housing
1R033
Motor housing