Use and Care Manual

10 ENGLISH
When you pull the switch trigger, the battery indicator
indicates the remaining battery capacity.
Battery indicator status Remaining
battery
capacity
On
Off
Blinking
50% to 100%
20% to 50%
0% to 20%
Charge the
battery
Indicating the remaining battery capacity
Only for battery cartridges with the indicator
1
2
►1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
catetheremainingbatterycapacity.Theindicatorlamps
light up for a few seconds.
Indicator lamps Remaining
capacity
Lighted Off Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
Thebattery
may have
malfunctioned.
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
Automatic speed change function
1
►1. Mode indicator
Mode indicator status Operation mode
High speed mode
High torque mode
Thistoolhas"highspeedmode"and"hightorque
mode". It automatically changes operation mode
depending on the work load. When mode indicator
lights up during operation, the tool is in high torque
mode.
Stopper pin
CAUTION: Always hold the handle when
releasing the stopper pin.Otherwisethehandle
springsupanditmayresultinpersonalinjury.
Toreleasethestopperpin,keepapplyingaslight
downward pressure on the handle and then pulling the
stopper pin.
1
►1. Stopper pin