Use and Care Manual

2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: XSL05
Blade diameter 165 mm (6-1/2")
Hole (arbor) diameter 15.88mm (5/8")
Max. miter angle Left 52°, Right 52°
Max. bevel angle Left 45° (46° when using release lever),
Right 45° (46° when using release lever)
No load speed (RPM) 5,000 /min
Laser type
Wavelength 655 nm, Maximum output
1mW (Laser Class II)
Dimensions (L x W x H) 340 mm x 400 mm x 440 mm
(13-3/8" x 15-3/4" x 17-1/4")
Rated voltage D.C. 18 V
Standard battery cartridge BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B /
BL1860B
Charger DC18RC / DC18RD / DC18SD / DC18SE / DC18SF
Net weight 6.3 - 6.6 kg (13.9 - 14.6 lbs)
Max. Cutting capacities (H x W) with blade 165 mm (6-1/2") in diameter
Miter angle Bevel angle
45° (left) 0° 45° (right)
0° 30 mm x 92 mm
(1-3/16" x 3-5/8")
46 mm x 92 mm
(1-13/16" x 3-5/8")
15 mm x 92 mm
(9/16" x 3-5/8")
45° (left and right) 30 mm x 65 mm
(1-3/16" x 2-9/16")
46 mm x 65 mm
(1-13/16" x 2-9/16")
15 mm x 65 mm
(9/16" x 2-9/16")
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
estcombination,accordingtoEPTA-Procedure01/2014,areshowninthetable.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided with this
power tool. Failure to follow all instructions listed below
mayresultinelectricshock,reand/orseriousinjury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated(corded)powertoolorBATTERY-
operated (cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.Thereisanincreasedriskofelec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.