Use and Care Manual

18 ENGLISH
A
Changing knob type grip to bar type
grip
Toinstallthebartypegripontheplungebase,loosen
the screw of the knob type grip, then remove the knob
type grip, and then install the bar type grip by tightening
it.
12
3
►1. Knob type grip 2. Screw 3. Bar type grip
MAINTENANCE
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
TomaintainproductSAFETYandRELIABILITY,
repairs,anyothermaintenanceoradjustmentshould
beperformedbyMakitaAuthorizedorFactoryService
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual.Theuseofanyother
accessories or attachments might present a risk of
injurytopersons.Onlyuseaccessoryorattachment
for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Straightandgrooveformingbits
• Edgeformingbits
• Laminatetrimmingbits
• Straightguideassembly
• Trimmerguideassembly
• Trimmerbaseassembly
• Plungebaseassembly
• Offsetbaseassembly
• Gripattachment
• Templetguide
• Colletcone1/4"
• Colletcone3/8"
• Wrench13
• Wrench22
• Makitagenuinebatteryandcharger
NOTE: Some items in the list may be included in the
toolpackageasstandardaccessories.Theymay
differ from country to country.