Manualshelf

Use and Care Manual

ManualsBrandsMakita ManualsPower Tool Combo Kits18V LXT Lithium-Ion Brushless Cordless Hammer Drill/Impact Driver Combo Kit w/BONUS 18V BL Router and 18V Battery 2Pk
71727374757677787980
7 ENGLISH
NOTICE: If the tool is not secured after closing
the lock lever, tighten the hex nut, and then close
the lock lever.
1
►1. Hex nut
Adjusting cutting depth with the
plunge base
Optional accessory
1. Placethetoolontheatsurface.
2. Select the stopper screw by rotating the stopper
base.
1
2
►1. Stopper screw 2. Stopper base
3. Loosenthestopperpolexingnut,thenpullupthe
stopper pole while pressing the feed button.
2
3
1
►1. Stopper pole 2. Fixing nut 3. Feed button
4. Push down the tool until the tip of the trimmer bit
touchestheatsurface,andthenturnthexingleverto
secure the tool.
1
2
►1. Fixing lever 2.Trimmerbit
5. Press down the stopper pole while pressing the
feed button until it contacts the stopper screw.
2
3
1
►1. Stopper pole 2. Stopper screw 3. Feed button
6. Slide the depth pointer so that the pointer indi-
cates "0" on the scale.
1
►1. Depth pointer
7. Adjustthecuttingdepthbypullingupthestopper
pole while pressing the feed button.