Manualshelf

Use and Care Manual

ManualsBrandsMakita ManualsPower Tool Combo Kits18V LXT Lithium-Ion Brushless Cordless Hammer Drill/Impact Driver Combo Kit w/BONUS 18V BL Router and 18V Battery 2Pk
71727374757677787980
11 ENGLISH
1
►1. Lock lever
8. Attachthebaseplatebytighteningthescrews.
1
►1. Base plate
9. Insert the collet cone and the trimmer bit into the
offset base, and then tighten the collet nut.
1
2
3
►1.Trimmerbit2. Collet nut 3. Collet cone
10. Insert the hex wrench into the hole of the offset
base, and then tighten the collet nut with the wrench.
1
2
3
►1. Collet nut 2. Wrench 3. Hex wrench
Toremovethebase,followtheinstallationprocedureinreverse.
NOTE: You can also mount the belt to the pulley with-
outremovingthebaseplateasshowninthegure.
2
1
►1. Pulley 2. Belt
Installing or removing the plunge base
Optional accessory
1.
Open the lock lever of the plunge base, then insert
the tool into the plunge base all the way aligning the
groove on the tool with the protrusion on the plunge base.
1
►1. Lock lever