Use and Care Manual

15 ENGLISH
NOTE:Theactualcutsizeontheworkpieceisslightly
differentfromthetemplet.Thedifferenceisthedis-
tance (X) between the trimmer bit and the outside of
thetempletguide.Thedistance(X)canbecalculated
by using the following equation:
Distance (X) = (outside diameter of templet guide -
trimmer bit diameter) / 2
1
2
3
4
►1.Trimmerbit2.Templetguide3. Distance (X)
4. Outside diameter of templet guide
Using the trimmer guide
Optional accessory
Thetrimmerguideallowsfortrimmingcurvedsidelike
veneers for furniture by moving the guide roller along
the side of the workpiece.
1. Loosen the clamp screw, then install the trimmer
guide on the trimmer base, and then tighten the clamp
screw.
1
►1. Clamp screw
2. Loosentheclampscrewandadjustthedistance
between the trimmer bit and the trimmer guide by turn-
ingtheadjustingscrew(1mm(3/64")perturn).Atthe
desired distance, tighten the clamp screw to secure the
trimmer guide.
1
2
►1.Adjustingscrew2. Clamp screw
3. Move the tool with the guide roller riding the side
of the workpiece.
1
2
3
►1. Workpiece 2. Bit 3. Guide roller
z