Use and Care Manual

16 ENGLISH
Using the tool with the offset base
Theoffsetbaseisconvenientforworkinatightarea
such as a corner.
Using the trimmer base with the
offset base plate and grip
Theoffsetbaseplatecanalsobeusedwithatrimmer
base and a grip attachment (optional accessory) for
more stability.
1. Loosen the screws on the base plate, then remove
the base plate from the offset base.
12
►1. Offset base plate 2.Trimmerbaseplate
2. Attachtheoffsetbaseplatetothetrimmerbaseby
tightening the screws.
3. Attachthegripattachmentandthebartypegripto
the offset base plate by tightening the screws.
2
1
►1. Bar type grip 2. Grip attachment
Theknobtypegripremovedfromtheplungebasecan
be installed on the offset base instead of the bar type
grip.
1
2
►1. Screw 2. Knob type grip
Using the tool with the plunge base
Alwaysholdthegripsrmlywithbothhandsduring
operation. Operate the tool in the same way as the
trimmer base.
Using the straight guide
Optional accessory
1. Install the straight guide to the guide holder by
tightening the wing nut. Insert the guide holder into the
holes in the plunge base, and then tighten the wing
bolts.