Manualshelf

Use and Care Manual

ManualsBrandsMakita ManualsCordless Routers18-Volt LXT Lithium-Ion Brushless Cordless Variable Speed Compact Router with built-in LED light (Tool Only)
12345678910
10 ENGLISH
Installing or removing the offset
base
Optional accessory
1. Press the shaft lock, then loosen the collet nut.
1
2
3
►1. Collet nut 2. Shaft lock 3. Wrench
2. Remove the collet nut and the collet cone.
1
2
►1. Collet nut 2. Collet cone
3. Install the pulley on the tool by pressing the shaft
lock and tightening the pulley with the wrench.
1
2
3
►1. Wrench 2. Pulley 3. Shaft lock
4. Loosen the screws on the base plate, and then
remove the base plate.
1
►1. Base plate
5. Open the lock lever of the offset base, then insert
the tool into the offset base.
1
►1. Lock lever
6. Mount the belt to the pulley by rotating the belt
manually.
2
1
►1. Pulley 2. Belt
7. Close the lock lever.