Instructions / Assembly

13 / 41
Fig. 26
4
Pull off Brake cable [3] by adjusting slit of Adjust screw of
Brake assembly [1].
5
Pulling up Brake lever [4], remove nipple of Brake cable
[3] from Brake lever [4].
Fig. 27
6
Remove Hex socket bolts (2 pcs) [1] and Brake assembly
[3] from Handle complete.
6-6-2 Assembling
Fig. 28
1
Assemble by reversing the disassembly procedure.
Assemble Brake assembly and Brake cable. Adjust Brake
lever so that it is placed vertical direction to the ground as
shown left Fig.
Tips
Fasten the Adjust screw at Brake assembly and Brake caliper
assembly with Brake cable so tight that cable length can be
adjusted long enough even if it is extended.
Fig. 29
2
While engaging both Pad spring [4] and Pad hole [5] fasten
Brake caliper and Connector [3] with Screws.
[1]
[2]
[3]
[1]
[2]
[3]
[3]
[4]
[1]
[2]
[3]
[4]
[5]