Instructions / Assembly
Table Of Contents
- 1 CONTENTS
- 2 CAUTION
- 3 NECESSARY REPAIRING TOOLS
- 4 FASTENING TORQUE
- 5 LUBRICANT AND ADHESIVE APPLICATION
- 6 REPAIR
- 7 CIRCUIT DIAGRAM
- 8 WIRING DIAGRAM
![](/manual/makita/xuc01x1-dc18rd/instructions-assembly-english/images/img-6.png)
6 / 41
6-3 Battery box
6-3-1 Disassembling (Repair can be done with Upper frame)
Fig. 3
1
Remove four M5x14 H.S.H.Bolt WR [1] with 1R015-A
and Impact driver and take out Battery box assembly
[2].
Tips
Prepare a workbench [3] to put Battery box assembly [2].
Fig. 4
2
Remove Binding PT3x16 Tapping screws (8 pcs) [1]
and remove Front cover [2].
Fig. 5
3
Repair Controllers and other electric parts according to
Circuit diagram and Wiring diagram.
4
Remove Binding PT 3x16 Tapping [1] (5 pcs) and
remove Battery box [2].
5
Leaf springs [3] (2 pcs) are removed from Battery box
[2].
Note
Be careful not to lose Leaf spring [3] (2pcs).
Fig. 6
6
Remove PT 3x16 Tapping screws [1] (2 pcs) from
Terminal side and remove Terminal holder [2].
7
Remove Terminals[4] from Center case [3] (2 pcs).
[1]
[2]
[3]
[1]
[2]
1R015-A
[3]
[2]
[2]
[1]
[3]
[2]
[1]
[4]