Installation Guide
Table Of Contents
- 1 CONTENTS
- 2 CAUTION
- 3 NECESSARY REPAIRING TOOLS
- 4 FASTENING TORQUE
- 5 LUBRICANT AND ADHESIVE APPLICATION
- 6 REPAIR
- 7 CIRCUIT DIAGRAM
- 8 WIRING DIAGRAM
![](/manual/makita/xuc01x2-dc18rd/installation-guide-english/images/img-11.png)
11 / 41
*
Fig. 20
6
Loosening engagement of Clamp A [1] and Clamp B [2]
remove LED light assembly [4]section from Lower frame
[3].
6-5-2 Assembling
Fig. 21
1
Assemble Reflector [1] by engaging four protrusions with
four holes on LED circuit [1]. Though bottom shape of
Reflector is rectangular, it is non-directional.
Fig. 22
2
Insert the protrusion of Clamp A [1] into the hole of Lower
frame. In this way LED light assembly position is fixed.
[1]
[2]
[3]
[4]
[1]
[2]
[1]
[2]