Installation Guide

15 / 41
Fig. 33
6
Remove Front tire 430 [1] by lifting it up from Lower
frame [2].
Note
Two Washer [3] are attached at both left and right side of axle.
Two Coned disc spring 16 [4] are attached at opposite side of
Brake.
Fig. 34
7
Remove six Hex socket head Button bolt [1] and remove
Brake disc [2].
Note
Six Flat washers are attached opposite side of Brake disc.
Be careful not to lose them.
Fig. 32
8
Insert Valve clip [2] into Snap in Valve [1] and then turn
Valve core [3] counter clockwise to extract the air of Tire.
Note
Valve core (Valve rubber) can be supplied at local market.
Otherwise replace Snap in valve because it includes Valve
core. Be careful not to lose Valve core .
Fig. 36
9
Press down the center side of Tire 430 [1] with Arbor press
and remove one part of Wheel from the rim[3] of Front tire
430 [1].
[1]
[2]
[3]
[2]
[3]
[1]
[4]
[2]
[1]
[3]
[1]
[3]
[2]