Instructions / Assembly

15 ENGLISH

Lighting up the front lamps

Press the lamp button on the battery box to light up

the lamps. To turn off the lamps, press the lamp button

again.

► 1. Lamp button 2. Lamp

NOTE: The lamps go off if the machine is left unat-

tended for approximately 10 minutes.

NOTE: The lamps go off when the power is turned off.

NOTE: You can light up the lamps even if the lock key

is not inserted.

Adjusting the handle height

Remove the short hexagonal bolts and shoulder bolts

using the wrench included in the package, and then

adjust the handle height. The height can be adjusted to

three levels. Tighten the shoulder bolts and short hex-

agonal bolts to x the handle.

► 1. Short hexagonal bolt 2. Shoulder bolt

NOTICE: Fix the left and right handles at the

same height.

NOTICE: Do not tighten the short hexagonal

bolts with excessive force. Tighten them with

proper force so that the handles are stably xed.

NOTICE: Do not pinch the cords with the bolts.

Adjusting the width of the rear

wheels

Loosen the short hexagonal bolts using the wrench

included in the package, and then slide the rear wheels.

► 1. Rear wheel

Tighten the short hexagonal bolts using the wrench

included in the package to x the wheels.