Instructions / Assembly

16 ENGLISH

► 1. Short hexagonal bolt

CAUTION: Extend the rear wheels to the max-

imum to keep balance. When the rear wheels are

not extended, keep the load to a minimum.

NOTICE: Fix the rear wheels at the same position

on both sides.

Adjusting the width of the carrier

Loosen the 6 thumb nuts, and then slide the front and

side rails. Tighten the thumb nuts to x the front and

side rails.

► 1. Thumb nut 2. Rail

CAUTION: Do not slide the rails beyond the

limit mark.

OPERATION

Operating the machine

NOTICE: The front wheel is driven by battery

power in this machine. Use this machine to assist

with carrying operations.

NOTICE: Be sure to insert the lock key in the bat-

tery box before the operation. If the lock key is not

inserted, a short beep sound is emitted when you pull

the switch trigger. The beep sound stops by releasing

the switch trigger and pulling the brake lever.

1. Select the battery cartridge with the battery selec-

tion switch.

2. Press the power button on the control panel for a

few seconds to turn the power on.

► 1. Power button

3. Pull the brake lever to release the lock of the

brake lever.

► 1. Lock button 2. Brake lever

NOTE: Release the rear wheel brake if the rear

wheels are installed.

4. Hold the handles rmly with both hands.