Instructions / Assembly

8 ENGLISH

5. Raise the handles, and then insert them into the

base unit.

NOTICE:

Do not allow the cords inside area "A"

in the gure. Long objects may be entangled with the

cords and cause accidents.

NOTICE: Do not apply excessive force to the

cords when raising and inserting the handles.

NOTICE: Be sure to raise the handles with both

hands.

6. Open the carrier frame toward the front.

► 1. Carrier frame

7. Unfold the handles, then insert the long hexagonal

bolts into the base unit, and then tighten the nuts with

the wrench included in the package.

► 1. Long hexagonal bolt

8. Tighten the shoulder bolts from the rear using the

wrench included in the package.

► 1. Shoulder bolt

9. Tighten the short hexagonal bolts from both sides

using the wrench included in the package to x the

handles.

► 1. Short hexagonal bolt

NOTICE: Do not tighten the short hexagonal

bolts with excessive force. Tighten them with

proper force so that the handles are stably xed.

NOTICE: Do not pinch the cords with the bolts.

10. Fix the cords with the clamps.