Use and Care Manual
10 ENGLISH
Assembling and installing carrier
Optional accessory
1. Take out the carrier from the box, attach the front
and side rails to the base frame, and then tighten the
thumb nuts to x the rails.
1
1
► 1. Thumb nut
2. Place the carrier on the base unit, and then insert
the hexagonal bolts and washers into the frames from
the top. Tighten the washers and spring washers and
buttery nuts from the bottom to x the carrier.
1
2
3
4
5
3
► 1. Long hexagonal bolt 2. Short hexagonal bolt
3. Washer 4. Spring washer 5. Buttery nut
NOTICE: Use the long bolts for the front, and the
short bolts for the rear.
Installing bucket
Optional accessory
Place the bucket on the base unit, insert the hexagonal bolts
into the frames, and then tighten the washers and spring
washers and buttery nuts from the bottom to x the bucket.
1
3
4
2
1
►
1. Hexagonal bolt 2. Washer 3. Spring washer 4. Buttery nut