Use and Care Manual

7 ENGLISH
Indicator lamps Remaining
capacity
Lighted Off Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
Thebattery
mayhave
malfunctioned.
NOTE: Depending on the conditions of use and the
ambienttemperature,theindicationmaydifferslightly
fromtheactualcapacity.
Main power switch
WARNING: Always turn off the main power
switch when not in use.
Tostandbythetool,pressthemainpowerbuttonuntil
themainpowerlamplightsup.Toturnoff,pressthe
main power button again.
1
►1. Main power button
NOTE:Themainpowerlampbrinksiftheswitch
triggerispulledunderunoperatableconditions.The
lampblinksifyouturnonthemainpowerswitchwhile
holding down the lock-off lever and the switch trigger
NOTE:Thistoolemploystheautopower-offfunction.
Toavoidunintentionalstartup,themainpowerswitch
willautomaticallyshutdownwhentheswitchtrigger
is not pulled for a certain period after the main power
switch is turned on.
Switch action
WARNING: For your safety, this tool is equipped
with lock-off lever which prevents the tool from unin-
tended starting. NEVER use the tool if it runs when
you simply pull the switch trigger without pressing the
lock-off lever. Return the tool to our authorized ser-
vice center for proper repairs BEFORE further usage.
WARNING: NEVER tape down or defeat pur-
pose and function of lock-off lever.
CAUTION: Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
NOTICE: Do not pull the switch trigger hard with-
out pressing the lock-off lever. This can cause
switch breakage.
Topreventtheswitchtriggerfrombeingaccidentally
pulled, a lock-off lever is provided.
2
1
►1. Lock-off lever 2.Switchtrigger
Tostartthetool,turnonthemainpowerswitchand
graspthehandle(thelock-offleverisreleasedbythe
grasp)andthenpulltheswitchtrigger.Toolspeedis
increasedbyincreasingthepressureontheswitch
trigger.Tostopthetool,releasetheswitchtrigger.
Speed adjusting
Youcanadjustthetoolspeedbytappingthemainpowerbutton.
Eachtimeyoutapthemainpowerbutton,thelevelof
speed will change.
1
►1. Main power button