1 2 3
1 2 Position 0 Cutting action Applications Straight line cutting action For cutting mild steel, stainless steel and plastics. For clean cuts in wood and plywood. Small orbit cutting action For cutting mild steel, aluminum and hard wood. Medium orbit cutting action For cutting wood and plywood. For fast cutting in aluminum and mild steel. Large orbit cutting action For fast cutting in wood and plywood.
Lock-off ON Standby Workpiece to be cut Wood Mild steel Stainless steel Aluminum Plastics Number on adjusting dial 4-6 3-6 3-4 3-6 1-4
1 2 1 1 2 2 2 1
1 1 2 2 2 1
1 2 3 6 5 1 4 3 2 1 2 3
1 2 3 2 3 1
1 2 3
1 2 Posición 0 Acción de corte Aplicaciones Acción de corte en línea recta Para cortar acero bajo en carbono (dulce), acero inoxidable y plástico. Para cortes limpios en madera y madera laminada. Acción de corte orbital pequeño Para cortes rápidos de aluminio, acero y madera dura. Acción de corte orbital mediano Para cortes rápidos de madera y madera laminada. Para corte rápido en aluminio y acero dulce. Acción de corte orbital grande Para corte rápido en madera y contrachapado.
Desbloqueo Encendido (" ON" ) En espera Pieza a cortar Madera Acero templado Acero inoxidable Aluminio Plásticos Número en el control de ajuste 4-6 3-6 3-4 3-6 1-4
1 2 1 1 2 2
2 1 2 1 1 2
1 2 1 3 2 6 5 1 3 4 2 1 2 3
1 2 3 2 3 1
< USA only > WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and • arsenic and chromium from chemically-treated lumber.