Full Product Manual

CUTTING GUIDE:
Each Stain Pad can be cut into any number of shapes and sizes. To get you
started, we have created a cutting guide for common applicator sizes below.
Remember to follow the cleaning instructions before using the applicator.
Each 8 inch by 6 inch pad will yield:
6 Applicators 2.7 inch wide and 3 inches deep -or-
8 Applicators 2 inches wide and 3 inches deep.
Configuration #1
(6 applicators per pad)
Use scissors to cut pad in half along the
center seam. Using one of the two
halves, measure 2 2/3 inches down the
rounded edge of the pad. Cut
perpendicular to the rounded edge to
create your desired applicator.
Configuration #2
(8 applicators per pad)
Use scissors to cut pad in half along the
center seam. Using one of the two
halves, measure 2 inches down the
rounded edge of the pad. Cut
perpendicular to the rounded edge to
create your desired applicator.
Other sizing considerations
- Cut pad to fit into stain can
- Cut pad to cover the end of a pour spout
- Cut thin strips for testing multiple stains
- Cut edge less than 90 degrees to get
into box corners.
6”
8”
2.7”
2”
6 applicators/pad
#1
8 applicators/pad
#2



Scan for more
on Stain Pad
The Woodworker’s
Stain Pad
ORIGINAL & DOUBLE THICK
Instructions &
Cutting Guide
Visit makrs.tools for full line of products