User's Manual

6
Figure 2.1 b. The same connectors as in figure 2.1a showed on an
EasyLocator.
2.2 Mounting on the shielded antennas
Start by placing the X3M/EasyLocator on the antenna that you are going to
use for your measurement. The Parallel port and the Power connection
should point forward according to the picture (Figure 2.2).
Fasten the unit on the antenna by tighten the securing screws.
Figure 2.2 Mounting on the antenna
3. Encoder
6. DC power
4. PC comm.
1. Kill switch
2. ON/OFF