User's Manual

2.1 Battery mount
In figure 2, below, a dummy battery as well as a normal battery is shown. They look
similar but the dummy has a 4-pole fisher connector on the back. The dummy is used
when the antenna is powered from an external 12V battery.
Both of these units are mounted in the same way on the antenna, see below.
Figure 2, dummy-battery and normal LI-Ion battery.
When mounting the battery, gently attach the d-sub connector in front of the battery
with the d-sub on the mounting tower. Then pull the battery-relief know and press
down the battery in place. By releasing the knob, the battery is secured in place, see
figure 3, below.
Figure 3, mounting and dismounting the battery.
Page 8 (16)