Metal Bending Tools, Scribes & Awls 35
malco tool book | better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Die-Cast Zinc Jaws Not for use with steel Not for use with steel S5R S9R Compact 5” (127 mm) Jaws with Big 2” (51 mm) Bending Depth Big 9” (229 mm) Jaws with 2” (51 mm) Bending Depth Easy Folding Bends without ruining paint finish! Ideal for making clean and accurate angle bends for aluminum roof flashing, coil stock or fascia. Jaws feature depth graduations in 1/4” (6.4 mm) increments to a maximum 2” (50.
malco tool book | www.malcotools.com Straight or Offset, styles for the way you work! Durable cast steel construction with heavy-duty pivot point assures long service life. Vinyl-Gripped Jaws are non-marring. Comfortable vinyl cushioned grips. Generous 1-1/2 in. (38 mm) Throat Depth is versatile for a broad range of bending and seaming applications. Straight Seamer & Tongs Precision Ground Jaws with beveled nose make precise 135° bends.
malco tool book | better ideas for the real world. Hand Held Folding Tools Standard Adjustable Folding seams are formed from two steel halves, permanently joined together. Handy sight holes assure proper depth alignment. Quickly adjusts from 1/4” (6.4 mm) to 1-1/2” (38.1 mm) folding depths Model No. 9A Adjustable Folding Tool easily folds edges of aluminum siding, trim coil and lighter gauges of sheet metal up to 26 gauge (0.56 mm). The 9A quickly adjusts from 1/4” to 1-1/2” (6.4 mm to 38.
malco tool book | www.malcotools.com Mini-Brake ™ Compact & Portable Makes bends to 135 degrees in galvanized sheet steel up to 22 gauge (0.86 mm). A beefed-up 1/4” (6.4 mm) plate steel apron and 4’ (1.22 m) metal width capacity makes the Mini Brake ideal for fabricating plenums or large transitions at the job site. Compact size makes the Mini Brake suitable for use virtually anywhere on the job site. Extra wide feet offer stability even when operating on a truck tailgate. MB48A A 1/4” (6.
malco tool book | better ideas for the real world. Adjustable Sheet Metal Scriber Multi-Material Scratch Awls A3 A20 A00 A60 Measure, mark and scribe trim lines on sheet metal in one easy operation. Set desired trim depth on the 1/8” (3.2 mm) graduated scriber extension and tighten knob. The stop at the end of the scriber sleeve glides along edge of work as a 6 x 3/8” sheet metal screw point scribes a clean, hard line. Adjustable from 1/4” to 12-1/2” (6.4 to 318 mm) depths.
