Fiberglass Duct Tools 22\
malco tool book | www.malcotools.com Tensioning Tools Adjustable Excess Tie U.S. Patent No. 4,947,901 / No. 5,048,575 High leverage tensioning tool with auto cut-off,for continuous use on-the-job. The TY6 Tensioning Cutting Blade Adjustment Knob AUTO-CUT-OFF Breakaway spring mechanism automatically engages cut-off blade at desired tension setting. Features hardened steel stampings with weather resistant nickel chrome finish.
malco tool book | better ideas for the real world. Cutter U.S. Patent No. 5,225,237 for Flexible Fiberglass Duct Built-in wire cutter lets you finish the job you started with just one tool! Double edged blade cleanly pierces through outer skin and insulation. Cuts from either direction around entire circumference of duct. Fine honed blade is long lasting stainless steel. Wire cutter cuts hardened wire rib coil. Compound leverage, for easy wire cutting. Comfortable, non-slip vinyl gripped handles.
malco tool book | www.malcotools.com Duct Knive Hole Cutter for Flex & Ductboard for Fiberglass Duct Board FG1 Serrated edge aids cutting “flex” fiberglass wool duct. DK6S Makes precise holes in ductboard for flex duct take-offs. Supplied with standard double point utility knife blade for cutting 1 inch (25.4 mm) board. Use No. KBHC blade for 1-1/2 (38.1 mm) inch ductboard. Cuts 4” to 20” (102 to 508 mm) diameter holes in fiberglass ductboard. Operation is fast and easy.
malco tool book | better ideas for the real world. Ductboard Fabricating Hand Tools | Square | Knives Lay out ductboard as you cut with the FasGroov Fabricating System. Single tools and full kits available for easy fabrication of all brands of 1” (25.4 mm) or 1-1/2” (38.1 mm) ductboard. Malco’s patented one-piece layout system incorporates a FasGroov Square with distinctive sled-style tools. Offsets built into square and tools allow you to lay out ductboard as you cut.
malco tool book | www.malcotools.com FasGroov® Ductboard Fabricating Kits Kits for 1” (25.4 mm) Ductboard FGSLK Shiplap Kit-Silver Hand Tools Includes: FGV1, FGV24, FGV3, FGV5, FGS Square plus FGK, FGM and FGF Knives and #6 Tool FGV6 in Tool Case. FGVK (Vee Kit Not Shown) Shiplap Kit-Silver Hand Tools Includes: FGV1, FGV, FGV5, FGS Square plus FGK, FGM and FGF Knives and #6 Tool FGV6 in Tool Case. FasGroov® Kits for 1-1/2” (38.
malco tool book | better ideas for the real world. COLOR Ductboard Fabricating Tool Specifications #1 Female Shiplap 1” (25.4 mm) SILVER TOOLS FGV1 Kits for 1” (25.4 mm) Ductboard 1-1/2” (38.1 mm) GOLD TOOLS FGL1 (12.7 mm) (19.1 mm) 1/2” 3/4” FGV1RB* FGL1RB* FGV24 FGL24 Shiplap Kit #FGSLK Silver Hand Tools (3.2 mm) (1.6 mm) 1/16” 1/8” Includes: FGV1, FGV24, FGV3, FGV5, FGS Square plus FGK, FGM and FGF Knives and #6 Tool FGV6 in Tool Case.