Tile / Flooring / Drywall and Ceiling Tools 93
malco tool book | better ideas for the real world. TurboShear ™ Shear Power for Fiber Cement Backer Board Make your drill a Fiber Cement Backer Board Shear! Versatile and portable, quickly prep surfaces for tile or flooring. With minimal dust and maximum power, you’ll make fast, straight cuts, quick corners and circles in fiber cement backer board and you’ll do it all with easy one-hand operation.
malco tool book | www.malcotools.com TurboShear Air Powered ™ Shear Power for Fiber Cement Backer Board Clean, Accurate and FASTER! Precise Arcs Straight Shearing Long Lasting Blades Use your existing air supply! Min 2600 RPM—4 CFM, 133 L/Min 90 PS1, 6.2 Bar TSF2A This pneumatic TurboShear will cut 1/2” (13 mm) Fiber Cement Backer Board quickly with minimal dust! The 2600 RPM motor unit gives you all the added power and speed you need for volume cutting at the job-site.
malco tool book | better ideas for the real world. Punch Lock Metal Stud Crimper Compound leverage increases mechanical advantage nearly 7 to 1. Simply squeeze handles together with one hand while holding stud in place. A unique punch and die shape creates a rectangular crimp, bending over thicknesses of channel and stud at the same time to form a sturdy bond. Crimp is always the proper strength and resists stress from any angle.
malco tool book | www.malcotools.com 1/8” (3.2 mm) Ceiling Grid Punch Malco’s unique, Ceiling Grid Punch makes a clean 1/8” (3.2 mm) hole in up to three layers of 25 gauge (0.53 mm) ceiling grid. CGPR The tool’s slim but strong steel “C” frame allows easy access in tight corners and is ideal for punching through main tees and perimeter wall angle that is to be secured with rivets. A generous throat opening allows full operation from the edge of both standard 1” and 1/2” (25.4 & 12.7 mm) grid profiles.
malco tool book | better ideas for the real world. Guillotine Shear for Laminate Flooring Quickly make square cuts in 5/16" (8 mm) laminate flooring. Hand Nibbler for Fiber Cement Backer Board Fast, straight, clean cuts without distortion. • Cuts cleanly without distortion • Makes fine, precise trim cuts and round cuts with ease • Generates minimal dust FCC5 A large stable plate with board stop supports ensure square, straight cuts up to 8-1/4" (210 mm) long.
