Brochure

malco tool book

better ideas for the real world.

120 Malco Products Inc. Est. 1950

One-piece forged, I-beam

construction. Full-polished

heads with beveled face and

pein are corrosion resistant.

Hammer sections are

individually hardened and

tempered for strength and

resiliency.

Sheet Metal

Hammers

One-piece steel

Vinyl Gripped Setting Hammer

Leather Gripped Setting Hammer

Vinyl Gripped Riveting Hammer

Dead Blow Hammer

Leather Gripped Riveting Hammer

Molded-on vinyl grips minimize recoil and offer excellent

comfort, non-slip gripping and durability.

Grip is protected with a durable lacquer coating.

Leather conforms to hand over time.

Easily, Malco’s most popular setting hammer.

Molded-on vinyl grips minimize recoil and offer excellent

comfort, non-slip gripping and durability.

One piece construction of weather-resistant,

urethane compound ensures long service life.

Grip is protected with a durable lacquer coating.

Leather conforms to hand over time.

Non-Marring • Non-Sparking • Non-Recoiling

• Steel shot inside head absorbs impact to prevent recoil.

• Excellent for working copper, other soft metals and hardened

sheet steel including ductwork and auto body panels.

• Flanged handle butt for a more secure grip.

Catalog Head Weight Head Length Face Size O/A Length

Number Description oz. (g) in. (mm) in. (mm) in. (mm)

SH3 Leather Gripped Sheet Metal Hammer 18 (510) 5-1/2 (140) 7/8 (22.2) 11-3/4 (298)

SH3V Vinyl Gripped Setting Hammer 18 (510) 5-1/2 (140) 7/8 (22.2) 11-3/4 (298)

RH4 Leather Gripped Riveting Hammer 12 (340) 4-7/8 (124) 3/4 (19.1) 11 (279)

RH4V Vinyl Gripped Riveting Hammer 12 (340) 4-7/8 (124) 3/4 (19.1) 11 (279)

DB1 Dead Blow Hammer 17 (482) 3-1/2 (89) 1-1/4 (32) 11 (279)

Speciﬁcations

PAGE 1
malco tool book | better ideas for the real world. Sheet Metal Hammers One-piece steel One-piece forged, I-beam construction. Full-polished heads with beveled face and pein are corrosion resistant. Hammer sections are individually hardened and tempered for strength and resiliency. Most Popular! Easily the most popular choice of sheet metal professionals worldwide, the Malco No. SH3 Setting Hammers leather grip conforms a permanent bond between the users hand for ultimate comfort and ease of use.
PAGE 2
malco tool book | www.malcotools.com Hammers and Duct Ripper Rip Starter Hole Handled Duct Ripper Claw Hammers Specially angled ground tip easily punctures and rips duct to the desired length starting hole. Vinyl Gripped One-Piece Steel Insert TurboShear or metal cutting snip Hardened tip is ground on both sides to create 2 cutting edges for long, useful life. Cutting edges are aligned with shaft flats for large striking surfaces. 16SCV CDR One-piece forged, I-beam construction.