Specification

Malibu Wide Plank Rigid Core Luxury Vinyl Plank Flooring Specification Data
3
Curling Openings Average (OAvg) ≤ 0.004” (0.1mm) Maximum (OM)
≤ 0.008” (0.2mm)
Surpasses Requirements
ISO 24337 Ledging Average (HAvg) ≤ 0.004” (0.1mm) Maximum (HM)
≤ 0.006” (0.15mm)
Surpasses Requirements
ASTM F1914 Residual In-
dentation
Average: ≤0.007” (0.18mm) Surpasses Requirements
ASTM F1914 Surface Integ-
rity
No puncture through wear layer / décor into rigid
core
Surpasses Requirements
ISO 23999 Dimensional
Stability
≤0.25% / lineal ft. (305 mm) Surpasses Requirements
ISO 23999 Curling ≤0.080” (2.0mm) Surpasses Requirements
ASTM F925 Chemical Re-
sistance
No more than “Slight Change” Surpasses Requirements
ASTM F1514 Resistance to
Heat
Average ΔΕ < 8.0
Surpasses Requirements
ASTM F1515 Resistance to
Light
Average ΔΕ < 8.0
Surpasses Requirements
ASTM F970 Static Load No Oicial Requirements (Wear Layer < 20mil) ≤0.005” (0.13mm), 250psi
Footnotes
• ASTM E648 - Critical Radiant Flux (Radiant Panel): Passes Requirements for Class I per International Build-
ing Code (IBC) 2018 & NFPA 101 Life Safety Code.
• ASTM E662 - Smoke Density: 450 is the limit established by many state, county, and/or local building and/
or fire codes, but is not set as a limit for (resilient) flooring products nationwide. Thus, Smoke Density re-
quirements for flooring products may vary from jurisdiction to jurisdiction. Consult your building inspector
/ fire marshal to learn more.
• CPSIA = Consumer Product Safety Improvement Act.
Ashlar
Stagger
Recommend Installation Options: