User guide

Installation & Loading Instructions - MPG119 Maui-2

MALONE

. Place and center the second SUP onto the

Spacer Pads. See image 9.

. Dress the buckle end of the Load Strap under the

saddle and back up and over the top SUP.

See image 10.

NOTE: This instruction is applicable for both one

or two SUPs.

. Place the two Spacer Pads onto the SUP. Locate

each Pad parallel with the front and rear saddles

and centered on the board. See image 8.

NOTE: If only one SUP is to be transported, skip

Instruction 8 and go directly to Instruction 10.

. Pull the buckle end of the Load Strap so that

one continuous loop is over the top SUP. Cross

the loop for additional holding power.

See image 11.

NOTE: This instruction is applicable for both

one or two SUPs.